She's small, but when it comes to taking the waves head-on, she packs a mighty punch. Big boat attitude in a small easy package easily describes the Edge Tracker 426 in perfect detail. We've taken the same high-tech boat building techniques used for the rest of our designs and incorporated them here, including the wave busting 20 º hull design that makes for such a such a great ride.

The cockpit is open and uncluttered, giving you plenty of fish fighting room, loads of storage compartments under the deck and fish holders along the side of the hull. Also included is a recessed anchor locker, 70 litre under floor fuel tank and a boarding step for easy access to climb aboard. Easy to maintain and trailer, edge Tracker 426 will provide you with years of family fun and offshore memories.

Overall Hull length = 14 ft ( 4.26m)
Beam = 6ft (1.82m)
Hull Draft = 10" (251mm) 
Rec Horsepower = 40-50 Hp
Deadrise @ Midship = 20 degrees 
Engine shaft length = L/S (20.5")
Fuel Capacity = 70 litres 
Approx Hull weight (pending builder) = 374 lbs (170 kg)
Max Persons = 5 Adults

   The Edge Tracker 426 Specifications 
EdgeTracker 426 Plan Price
                                                                                      THE  EDGETRACKER 426

                       With the best technical support: we will help you succeed!
                               All our plans come with full technical support.

@ WEB DESIGN BY BOWDIDGE MARINE DESIGNS

We will respond immediately. At the same please visit our forum site, to share ideas about our boats and thousands of pictures - see completed boats and many of the building steps done by builders like you.

Designed Boat Plans

Proudly Australian
     Bowdidge
Marine Designs
 Boat Designs with "Reel Flare"

         We have boat plans (both yacht designs, catamaran designs and power designs) for all sizes for the amateur boat builder and Professional boatbuilder. From the 12ft Mushulu plywood stitch & glue power boat design to the Oceansky 57 strip plank composite multihull design. We design and build, plywood boats, strip plank boats and fibreglass composite boats to very modern styling for both yacht designs, multihull designs and power boat in round bilge, multi-chine or radius chine hull forms, including aluminum drift boats, aluminum landing craft, aluminum monohull boats, aluminum catamarans, aluminum special purpose boats, and aluminum RIBs

LIQUID ENGINEERING:
The construction is epoxy-fiberglass-plywood composite, a stitch and glue composite system designed for efficient and fast building. To put it another way, the hull material is engineered as a fiberglass laminate whereby the plywood is treated as a thick, yet weaker laminate within the fibreglass schedule.
Building the boat is easy. The builder simply assembles the hull as a plywood boat first, then glasses the outside and inside with fiberglass, to produce a strong composite hull without all the time consuming woodwork associated with traditional plywood on frame. Bog, fair, paint then time for the internals. Its that easy
                         To see more on our  plywood composite construction method, please click HERE.     Or.... you can visit our boat building FORUM   

              Click "Buy Now" to Purchase Full Plans
                                Postage Worldwide
"저희 '바우딧지 마린 디자인(Bowdidge Marine design)' 의 모든 디자인은 한국으로 판매하지 않습니다.
저희 디자인의 보트를 구매하시고 싶으신분은 한국의 공식딜러인 '립타이드보트웍스' 대표 여영기 (010-5244-8255) 로 문의 하시기 바랍니다.

COMPLETE PAPER BOAT PLANS : For our builders we offer full size printed bulkhead/ frame patterns, printed on 24" wide paper which are taped together to provide fulls size outlines. Using the full size patterns and detailed plan sheets, the parts can be accurately marked and cut out.
All Plan sheets are printed on Architectural D (24" x 36" ) paper except for the full size patterns. Detailed plans consist of  10 sheets which detail all aspects of construction.

    Bowdidge Marine Designs
Performance  Boat Designs with "Flare"

With their sleek yet simple lines, tillered steered, large deck casting area, handy storage compartments, pedastal seating and a full transom with a boarding step are just a few of the standard features that will be offered in these models. Also with a deadrise at midship of 20 degrees, the EDGE TRACKER 426 offers a smooth ride in offshore or rough/white water conditions.

"Boats Built by People ...  
 ... Just like You"
NOTE: Do NOT build this boat AS FOAM CORE CONSTRUCTION
We do not offer CNC cut files for this design.

MATERIALS LIST FOR THE EDGETRACKER 426

The following list of materials is approximate and intended for calculation of approximte costs. We offer no guarantees of accuracy. The list is for all plywood in the construction of the hull, deck and interior. Allowance has been made in the quanties for about 10% wastage. Resin and glass quanties are only approximate.

MARINE OR EXTERIOR BC GRADE PLYWOOD (Do not use CD structural plywood)
6mm (1/4") - 9 Sheets
9mm (3/8") - 12 Sheet
12mm (1/2") - 3 sheets

RESIN AND GLASS (For coatings and reinforced areas)
Epoxy Resin & Hardener - 72 kg (19 US gal)
400-450gm (12oz) Double Bias - 67 sq.m ( 80sq.yards)
3 kg (4.4 lbs) glue powder (Cabosil)
3kg  (4.4 lbs) Q-cells (fairing Powder)

The materials list above covers all the supplies for the boat as designed.
Useage of materials may vary due to several factors. For example, a experienced builder will use less resin. Our resin calculations are based on a 50% glass content. Options, customization and variations within your build will also effect the bill of materials and outcome.  

SAVE TWO THIRDS! YES, you can build your own boat & SAVE TWO THIRDS of the cost of a factory built power or sailboat, YOU can prove it ... Just order the PLANS of your choice,  build your own & you can SAVE 50% of the cost of a USED boat &, you do not even have to do all the work yourself to save.

BOATBUILDERS GROUP - CLICK IMAGE TO VIEW

aaaaaaaaaaaaiii